Dolly Chopper Stopper EC 120

Description

Chopper Stopper® E Model is a unique, patented machine to handle helicopters on pavement. It lets one person quickly load and move a helicopter with ease and unmatched safety for the helicopter.

Unlike transporters you may be familiar with, the CHOPPER SPOTTER loads from the rear. Roll it under the ship and attach the two “yokes” to the wheel attachment points.

Easy to load from the rear

Take the remote control in hand, step back to the tail, and press UP. The helicopter balances just as if it were on its regular wheels. Press FWD (or REV) on the hand held control, and the “soft start” electronic speed control gently moves the ship at any selected speed, up to 3 feet per second.

The hand-held control regulates speed, direction, and raises and lowers the ship. The electronic controls offer dynamic braking.


Price

5900$ CND

E MODEL SPECIFICATIONS

Capacity: 4,500 lb (2,075kg)

Motor: 1 hp DC PM Motor

APU (28 v. nom): Optional

Batteries: 2 Optima AGM Red Top

Battery Charger: 24 v. 6 amp on-board

Swivel Wheels: Heavy duty single wheel

Drive Wheel: 4″ x 8″ (10cm x 20cm)

Shipping Weight: 700 lb (318 kg)

Shipping Dimensions: 69″ x 43″ x 17″  ( 175 x 110 x 43 cm)

Hydraulics: Manual override for down

 

ALL MODELS

Lifting System: Hydraulic/Electric

Brakes: Electronic, variable

Control Cable: 28ft. (8.5m)/Neopren

Overload Protection: Circuit Breaker 100amp (auto reset)

Speed Control: Variable to 3ft./sec ( 1 m/second)

Color: Safety Yellow

Transmission: Chain Drive

Duty Cycle: 3-4 hours continuous duty between charges at least

Voltage: 115 or 230 volts (50mhz or 60mhz)

Battery Gauge: Digital

 

DIMENSIONS

chopper_spotter_dolly_specifications

A) WIDTH: 40″ (102cm)

B) LENGTH: (w/0 handle): 60″ (153cm)

C) OVERALL HEIGHT: 9,5″ (24cm)

D) LIFTING ASSEMBLY: 59″ (150cm)

E) MAX LIFT: 16″ (40,6 cm)

F) FRONT TO C.G: 34″ (86cm)

G) GROUND CLEARANCE: 1,5″ (3,8 cm)

Want to see specifications and the history of this device?

Translate »
preloader